Lucci Connect Wi-Fi Fan Remote Control

Using the Lucci Connect app, this Smart Fan Remote will allow you to control your fan remotely from almost anywhere. Turn your fan on/off and change the speed via the remote, from your phone or even voice control from a smart home hub. Compatible with all our AC fans that require a remote to be purchased separately

If you need to pair more than one fan to a remote individually, follow these steps:

Step 1: Turn Both fans off at the wall switch

Step 2: After 10 seconds, switch the first fan on from the wall switch that you wish to pair with the first remote. The fan should beep 4 times.

Step 3: Once the fan has beeped 4 times, Hold down the power button on the remote until the fan lights/fan turns on. Once the fan turns on, release the power button you were holding down and the fan will be paired to that remote.

Step 4: The fan that has just been connected to the remote, switch the fan off at the wall switch.

Step 5: Switch the second fan on from the wall switch that you wish to pair with the second remote. The fan should beep 4 times.

Step 6: Once the fan beeps 4 times, hold down the power button on the remote until the fan light/fan turns on. Once the fan turns, release the power button on the remote and the second fan will now paired to that remote

Step 7: Turn the first fan back on at the wall switch. It will beep 4 times. Don't press any buttons on any of the remotes for 2 minutes.

Step 8: After 2 minutes, you should be able to control the fans individually from each remote.